kev69
New Member
Posts: 44
|
Post by kev69 on Jun 16, 2010 22:08:34 GMT -4
Well my father-in-law and I started tearing apart the YJ on Monday, the drive shafts are off, starter, and the 4x4 shifter is off. The transfer case is loose and will be taken off in the next day or 2. All should be off by the weekend. Taking our time taken stuff off..  Soon will be the new clutch ( kit ) installed and the YJ should be rolling again. |
|
|
|
Post by OUTLAW MF on Jun 16, 2010 22:54:25 GMT -4
Well my father-in-law and I started tearing apart the YJ on Monday, the drive shafts are off, starter, and the 4x4 shifter is off. The transfer case is loose and will be taken off in the next day or 2. All should be off by the weekend. Taking our time taken stuff off.. Soon will be the new clutch ( kit ) installed and the YJ should be rolling again. RTFO Kev...git 'er dun!! Jeff |
|
|
|
Post by timsyj on Jun 17, 2010 16:42:08 GMT -4
got any questions just ask kev....good for you guys too learn this jeep stuff.....lol  |
|
|
|
Post by 90bronco on Jul 3, 2010 8:21:38 GMT -4
Fixed a rusted brake line ,front to back with new epoxy coated , any one know if it stands up well?
|
|
|
|
Post by 90bronco on Jul 3, 2010 14:30:47 GMT -4
Took my solenoid pack apart to see why it was not working properly ,2 corroded wires and all fixed up .
|
|
|
|
Post by OUTLAW MF on Jul 3, 2010 23:23:21 GMT -4
Well lets see...this week we (MLC) took my tcase apart to replace all the seals and try to stop some serious leaks I had and figured since we have gone that far that we might as well replace the rear main engine seal which has been leaking for some time..then Wednesday night after getting the transmission out we found that my clutch was looking pretty worn and figured we might as well replace the clutch since we have it out...well, everything was closed Thursday, so luckily my good friends at APJ Auto managed to get me one in first thing Friday morning and shipped it MBW courier same day and now after taking the weekend off, we are ready to get her all put back together this Sunday night ;D Once we get the ol' Exxon Valdeze Pirateship back together we can start installing Cindy's new long arm upgrade A BIG thank you to MLC...You do some fine work my friend!! Jeff |
|
|
|
Post by 90bronco on Jul 4, 2010 6:50:58 GMT -4
|
|
|
|
Post by timsyj on Jul 4, 2010 7:05:23 GMT -4
I fixed up my frame in 2 different spots, put my skid plate back up to it's normal place and started too make my new rock rails with tube steps. Rails all made up and the steps are on and almost welded up. Getting close!! |
|
|
|
Post by rugidone on Jul 6, 2010 8:54:57 GMT -4
Oh noes, I have been slipping, damn weddings! I have even missed coffee for 3 weeks!
Lately, I have had to do routine maintenance, (I don't usually break stuff mall crawling), Seized Idler Pulley, Starter finally went, eyed up two fancy skidplates waiting for install, just gotta find a gas tank skid.
I also installed a dash clock, the wife insisted, thinking maybe I would come home and spend some TIME with her.
|
|
matt5
New Member
Posts: 41
|
Post by matt5 on Jul 7, 2010 8:33:11 GMT -4
;Dgot the motor mount for the f150 should be coming home this weekend |
|
|
|
Post by OUTLAW MF on Jul 7, 2010 11:52:34 GMT -4
Oh noes, I have been slipping, damn weddings! I have even missed coffee for 3 weeks! Lately, I have had to do routine maintenance, (I don't usually break stuff mall crawling), Seized Idler Pulley, Starter finally went, eyed up two fancy skidplates waiting for install, just gotta find a gas tank skid. I also installed a dash clock, the wife insisted, thinking maybe I would come home and spend some TIME with her. Nice to see you guys posting on the board, I was starting to wonder if the club had gone down the toilet... Jeff |
|
|
|
Post by rugidone on Jul 7, 2010 13:09:07 GMT -4
We are all still alive and kicking, but I have a lot going on, nobody has even really been wheeling, Mikes jeep is in for paint, Tim's been working on his heeep for what seems like forever, fisher is trucking so rarely around, and Beau is waiting on offset wheels/motor change, billy disappeared, TJ's outta the province and yous guys jeeps have been under Malcolm extremely sharp knife lol.
Thats an update from Amherst for ya.
|
|
|
|
Post by timsyj on Jul 7, 2010 13:47:58 GMT -4
We are all still alive and kicking, but I have a lot going on, nobody has even really been wheeling, Mikes jeep is in for paint, Tim's been working on his heeep for what seems like forever, fisher is trucking so rarely around, and Beau is waiting on offset wheels/motor change, billy disappeared, TJ's outta the province and yous guys jeeps have been under Malcolm extremely sharp knife lol. Thats an update from Amherst for ya. YA what he said, but the part about me working on mine like forever.....NOT!!!.. just building rails and steps but nothing wrong with the heep...lol.......................yet! |
|
|
|
Post by rugidone on Jul 7, 2010 14:35:53 GMT -4
Come on now Tim, you forget you did some frame repair in multiple spots and your tub repair at the back? lol
|
|
|
|
Post by OUTLAW MF on Jul 7, 2010 14:58:08 GMT -4
Good luck on the weekend dewd! Jeff
|
|
