|
|
Post by timsyj on Jul 7, 2010 15:04:48 GMT -4
That didn't take long, the rails did when ya run out of wire for the welder. Holes are easy to fix. use to it by now....lol
|
|
|
|
Post by rugidone on Jul 7, 2010 19:50:13 GMT -4
Your all welcome to come to the reception its at the pugwash legion.
Hope yas make it out!.
I think my brother in law is bringing his YJ down, he wants to do some wheeling in wentworth, so I think we may go out on Monday.
|
|
|
|
Post by timsyj on Jul 7, 2010 20:44:25 GMT -4
The wife and i will most certainly show up to your reception buddy o pal....Maybe if we get enough people we can figure out a non-drinking driver.....lol ;D
|
|
|
|
Post by OUTLAW MF on Jul 7, 2010 22:10:27 GMT -4
Your all welcome to come to the reception its at the pugwash legion. Hope yas make it out!. I think my brother in law is bringing his YJ down, he wants to do some wheeling in wentworth, so I think we may go out on Monday. I'm actually supposed to hook up with Derrick Monday to explore around the Breakline trail...how big is the YJ?? Jeff |
|
|
|
Post by rugidone on Jul 7, 2010 22:13:03 GMT -4
Its Whippers(the one he rolled haha) 4" with 32s runva 12k on board.
|
|
|
|
Post by OUTLAW MF on Jul 8, 2010 9:17:07 GMT -4
Kool...he shouldn't have too much problems on the Breakline...
Jeff
|
|
matt5
New Member
Posts: 41
|
Post by matt5 on Jul 9, 2010 8:56:33 GMT -4
;D got a roll bar for BIG Blue
|
|
|
|
Post by mudandmore on Jul 10, 2010 1:31:36 GMT -4
I got a 5 point cage lol, But i think we will drive past the breakline and go around the mountain that way to Hart Lake... Still a challange but a little less chance of a roll over...lol...  |
|
|
|
Post by timsyj on Jul 11, 2010 7:41:27 GMT -4
Your all welcome to come to the reception its at the pugwash legion. Hope yas make it out!. I think my brother in law is bringing his YJ down, he wants to do some wheeling in wentworth, so I think we may go out on Monday. CONGRADULATIONS Mr and Mrs LANGILLE SORRY DJ...We couldn't make it down had no driver to get us there and back. I hope it all went well.  |
|
|
|
Post by timsyj on Jul 11, 2010 13:14:32 GMT -4
That didn't take long, the rails did when ya run out of wire for the welder. Holes are easy to fix. use to it by now....lol Rails are done and on the jeep. I like bigtime!! |
|
|
|
Post by OUTLAW MF on Jul 12, 2010 21:03:16 GMT -4
That didn't take long, the rails did when ya run out of wire for the welder. Holes are easy to fix. use to it by now....lol Rails are done and on the jeep. I like bigtime!!  Where's the pics...or vid?? Jeff |
|
|
|
Post by timsyj on Jul 13, 2010 15:05:07 GMT -4
I was asked that by another but i forgot to take pics of the making of it. sorry.. I guess it will have to be a surprise like some other people are doing.....lol...  |
|
|
|
Post by 90bronco on Jul 18, 2010 7:09:19 GMT -4
|
|
|
|
Post by rugidone on Jul 19, 2010 10:14:46 GMT -4
Over the past week, I stuck my Creepy decal on, sewed on a new steering wheel cover, picked up a winch, and got around to fabbin some sort of bumper, long ways from done, but the winch is secured! Thinking I am going to relocate the solenoids, maybe open the airflow to the rad a bit more.  |
|
|
|
Post by OUTLAW MF on Jul 19, 2010 11:46:35 GMT -4
Looks good DJ...Did you get that winch while they were on fer $199.??
If I could have afforded it I would have picked one up for a rear suck down and rear recovery...nice price!!
Jeff
|
|
