Lift Kit

[kev69]

I have been looking for the best value and price and received an email from an outfit from Sussex which reads..........

Couple of options a 4 inch kit runs about 1000.00 bucks, springs,shocks bushings,pinion angle shims, for vibration, brake lines, complet kit. I think a 2.5 lift for about the same money would probably do what you want to get 33's on it because you already have a body lift, how much body lift/ as far as a slip yoke eliminator you can drop your tranny mount/plate with shime to correct your angle to fight vibration. I did my yj 3 inches and dropped the mount ant i worked fine. There is also a spring over conversion kit for about 550, no shocks these are rubicon lifts, I can get a more inexpensive line in that a 4' lift everything included goes for 766 plus shipping, definately the way to go in my opinion. It has the transfer plate drop and front sway bar links,drop pitman arm with it too. best thing to do is give me a call. Brad 433 6080 til 10 pm

--------------------------------------------------------------------------------

Is it worth the call?

[mudandmore]

Call... The more info you go in with the better...

[gonejeepn]

i have a 2.5" rubicon lift in my YJ. mil. wrap on the springs, brake line ext., tc drop kit, shims, shocks, all bushings. good kit. to do a SOA lift, byright you would need the proper springs for it. (they help with axle twist). the only thing i did wrong was get the 2.5" lift should have went bigger(3.5 or a 4") they do sag after time. anything over 2.5" you will need a SYE kit, which then calls for a new longer drive shaft(CV style)and maybe a motor lift. all of this just to get rid of the vib. have fun

[90bronco]

I ran 33's on my bronco completely stock , it seems like a lot of work to run 33's . I vote sell it and buy a rusty ford !

Just messin with ya , call them is probably the best , like mudandmore posted ... the more info the better!

[kev69]

Thanks guys.... for the input... I will hopefully find something resonable..