|
|
Post by OUTLAW MF on Nov 17, 2010 12:29:30 GMT -4
Hey Guys (Johnny5), I have a friend with an IFS 4Runner...he is running 31's with what he thinks is 3 inches of lift already and wants to squeeze some 35's under her...He is wondering how much lift he will need and if he can just put a a body lift in there to get 'er done??  Uploaded with ImageShack.usThoughts, ideas, parts for sale?? Thanks! Jeff |
|
|
|
Post by johnny5 on Nov 17, 2010 17:04:06 GMT -4
well if he has 3 in of susp should be able to fit 35 with a 2 in lift . barney is running 35 with 3" body lift and some fender trimming. i have some uhmw blocks here for a lift 2" or 3".prob best to buy new bolts at topline rentals in amherst or e lynns in truro Or he can look into a balljoint spacer(1 or 1.5 ) and rear landcruiser springs(2or 3" of lift i can't remember right off ) for more susp.
|
|
|
|
Post by johnny5 on Nov 17, 2010 17:05:16 GMT -4
a stock toy will clear 31 no prob so i would check close to see if lifted. maybe somebody just has cranked up the torsion bars also.
|
|
|
|
Post by skippy on Nov 17, 2010 21:21:28 GMT -4
I was running a 2.5" body lift and a 4" Trail Master Suspension lift and it cleared my 35" Krawlers just nice!
|
|
|
|
Post by jordan1990 on Nov 18, 2010 21:21:46 GMT -4
i got 35's on my pick up with 3inch body lift, i donno if the 4 runner would be the same
|
|
|
|
Post by 90bronco on Nov 29, 2010 19:43:40 GMT -4
4 runner should be the same , this is skippy's truck before the sas   |
|
|
|
Post by OUTLAW MF on Dec 2, 2010 21:31:01 GMT -4
Thanks everyone, I sent him a link here but I haven't really heard much from him since...
Jeff
|
|
