|
|
Winches
Sept 29, 2009 19:29:42 GMT -4
Post by timsyj on Sept 29, 2009 19:29:42 GMT -4
Got a question about winches. I have a 8000lb champion winch, now i took it apart fully and found a lot of dirty grease inside. So i cleaned it up, fixed a gear that was loose. Now do i put a lot of grease back inside and if so does it matter of the type. The reason i took it apart is that when i get a lot of pull on it, it suddenly just let's go. I try it again and the samething.  ??  |
|
|
|
Winches
Oct 13, 2009 20:12:39 GMT -4
Post by OUTLAW MF on Oct 13, 2009 20:12:39 GMT -4
I was hoping to see someone answer this, I was curious myself.
Did ya get her figured out Tim??
Jeff
|
|
|
|
Winches
Oct 14, 2009 14:22:35 GMT -4
Post by timsyj on Oct 14, 2009 14:22:35 GMT -4
Yes i found the problem with it. It was the springs in the clutch. Replaced the springs and refilled with teflon grease and she is ALLLL GOOD. Working better than ever too. Made a big difference putting a better type of grease in it. Hope this helps jeff.  |
|
|
|
Winches
Oct 14, 2009 16:07:25 GMT -4
Post by mudandmore on Oct 14, 2009 16:07:25 GMT -4
Right on... It's a handy tool to have...
|
|
|
|
Winches
Oct 14, 2009 18:30:33 GMT -4
Post by timsyj on Oct 14, 2009 18:30:33 GMT -4
Yup sure is when they are working other wise it's just a 90lb anchor.
|
|
|
|
Winches
Oct 14, 2009 19:49:01 GMT -4
Post by OUTLAW MF on Oct 14, 2009 19:49:01 GMT -4
Yup sure is when they are working other wise it's just a 90lb anchor. haha right on Tim, I was just curious, mine is different. Jeff |
|
